User's Manual

AyTerminal User Manual for AyCare
Contents V2.1
Time can be set manually on the AyTerminal, or – if registered to the AyServer – the time can be
automatically synchronized. Time synchronization is performed daily and also every time if
something changed on the AyTerminal that needs connection to the AyServer.
If the “Time/Date” item is entered the “Autotime” item is deactivated automatically.
The time input format is “hh:mm:ss” and the date input format is “DD.MM.YYYY” (European
format).
Clock
Time/Date
Change Time
Auto time
Change Date
Time: 23:59
Date: 31.12.2006
23:59:_
Change Time
9
2
1
0
10.12.2006
Change Date
OK
Figure 4-62 Clock menu – normal mode
Clock
Change Ti
Time/Date
Change Da
Time: 23:59
Date: 31.11.
2005
23:5_
OK
1
0
Change T...
.200_
OK
1
0
Change D...
Figure 4-63 Clock menu – jumbo mode
4.8.6Display
Display
Jumbo mode
English
German
Display
Jumbo
German
English
Figure 4-64 Display menu in standard and jumbo mode
The currently selected language can be seen and also changed in this menu. After user select
desired language AyTerminal will show message and it will reboot. It is done automatically. The
default language is English.
Language
changed.
REBOOTING!
Language
changed.
REBOOTIN
G!
Figure 4-65 Language message box
Using Jumbo mode menu item the user has the possibility to activate or deactivate the jumbo mode
of the display
4.8.7Security
4.8.7.1Setting the deactivation code
After the “Deactivation code” setup has been chosen an editor is displayed to enter the new
deactivation code. The deactivation code/ code consist of a combination of 4 buttons from the 5
Page 44 / 50