User's Manual
Table Of Contents
- 1Introduction
- 2AyTerminal Device
- 3Installation and startup
- 4AyCare application
- 5Quick reference
AyTerminal User Manual for AyCare
Contents V2.1
5Quick reference
5.1Device description
The detailed device description you find in chapter 2.1.
The major parts are:
• Display (OLED display):
Used for information screens and for input screens.
There are 2 display modes: standard mode and jumbo mode (big-sized characters)
See chapter 2.1.10.
• Navigation buttons:
4 touch sensor buttons around the display:
- arrow up: up button
- arrow down: down button
- right button: Enter button
- left button: Cancel button
The display also represents a button (center button)
See chapter 2.1.5.
• Status LED:
provides feedback about the current AyTerminal status
See chapter 2.1.2.
5.2Getting started
• Insert SIM card and battery
See chapter 3.
• Turn on the device: press the central button for 2 seconds.
The loading screen will be displayed.
See chapter 3.2.1.
• Enter the PIN of the SIM card.
Select the OK option and press the Enter button (right button).
See chapter 3.2.3.
• Select the AyCare application and press the Enter button.
• Optional:
Define the deactivation code (sequence of 4 buttons, default: up button, right button, down
button, left button)
Definition via Settings > AyTerminal > AyApplication > Deactivation code
See chapter .
• Select the AyCare mode you want to start and press the Enter button.
If a mode is set to auto start, this mode will be started automatically.
See chapters 4.2 and 4.3.
5.3Configuring the AyCare modes
The detailed device description you find in chapter 4.4.
• Voice Call:
Activation Time (see chapter 4.4.1)
Autostart (see chapter 4.4.2)
Notifiers (see chapter 4.4.3)
Phone numbers (see chapter 4.4.4)
• Panics button:
Activation Time (see chapter 4.4.1)
Page 48 / 50