User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
5.2Modes description
All modes provide a similar menu structure.
5.2.1Alarm clock
This mode provides an alarm clock. A timer can be set on a daily basis. An alarm is triggered when
the defined time is reached.
For configurable values and notifiers refer to chapter 5.4.3.
5.2.2Baggage Secure
This mode can be used for the protection of the baggage. The alarm is triggered on the AyTerminal
motion detection if the default or the defined threshold value of the ego-motion sensor is reached/
exceeded, which means that the alarm is triggered if the mode is activated (started and active) and
the baggage with the AyTerminal inside is moved. For configurable values and notifiers refer to the
chapter 5.4.3.
5.2.3Room Monitor
The Room Monitor mode is used with additional accessory designed by Design Affairs. The
accessory is used to hang the AyTerminal on a door handle.
Figure 5-18 The AyTerminal with the door accessory added on
The alarm is triggered on the movement of the door or on noise detection. The noise and the
AyTerminal ego-motion threshold values can be defined. This mode can be used to alarm when a
certain door is opened. Also in this mode the listen-In functionality is provided. If the listen-in phone
number is defined it is allowed to call the AyTerminal from the defined number and to listen-in. If no
listen-in number is defined the listen-in feature can’t be used. For user configurable values and
notifiers refer to the chapter 5.4.3.
5.2.4Car Alarm
This mode can be used in cars to trigger alarm when the default or the defined ego-motion or
temperature threshold is reached. The Car Alarm mode is used to protect a car against theft or for
alarming if the temperature in the car has reached a critical temperature (greater than or lower
than). E.g.: if was dog is left in the car an alarm can be triggered when the temperature gets
greater than the dog defined temperature. The trigger operator can also be changed (possible
values: “greater than” or “lower than”). Only one temperature threshold can be defined and stored
for this mode. For configurable values and notifiers refer to the chapter 5.4.3.
5.2.5Temperature Watchdog
In this mode an alarm is triggered when the defined or the default temperature is reached or
exceeded (“greater than or lower than). The trigger operator can also be changed (possible values:
“greater than” or “lower than”). Only one temperature threshold can be defined and stored for this
mode. For configurable values and notifiers refer to the chapter 5.4.3.
5.2.6Voice Call
This mode is used to establish a voice call to one defined phone number pressing the central
button for at least 2 seconds. By default there is no phone number defined. A call can be
established only after the phone number to be dialled is defined. The voice call can be ended by
pressing long (more than 2s) on the central button.