User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
5.4.3.2SMS
The SMS data are: the phone number and the message text. The message text can not be
defined/ modified on AyTerminal. For each mode there is a default value for SMS text defined (see
Table 5-5 AyAlarm mode specific settings) and it can be changed only using the web GUI.
This notifier can be activated or deactivated. The phone number to send the SMS can be changed.
Moving through the menu items is possible by using the up/ down buttons. The effect of these
actions is scrolling the menu up/ down.
If the highlighted item is “Active” then pressing the right button will check or uncheck the item.
If the highlighted item is “<phone number>” then pressing the OK button opens the Phone number
editor for adding/ editing the current value (see Figure 5-29).
Pressing the left button of the device leads to the previous screen (Notifiers menu).
In SMS setup screen the status icons are not displayed. Instead a suggestive title is displayed.
[phone]
Active
SMS
+20202...
SMS
Active
Figure 5-28 SMS setup menu
If the phone number is not defined then in the menu will appear “<Enter Nr.>”.
+385316_
Phone number
OK
1
0
+
+385_
Phone num
OK
0
+
Figure 5-29 Set phone number screen
The available characters are: + and 0…9.
Using the up/ or down navigation buttons the user can browse the displayed characters or select
OK.
To add a new characters press the Enter (OK) navigation button after highlighting the desired
character. To delete the last inserted character use the left navigation button. When no character is
available in the input area, pressing the cancel button redirects to the previous screen.
To save the set value first select the OK option and after that press the right button (marked with
OK).
The only validation that is made for the inserted phone number is to be in international format (to
start with +).
Only one phone number can be defined for SMS notification.
No acknowledgment tone will be played in the previous described screen above.
5.4.3.3Voice Call
This notifier can be activated or deactivated. The configurable value of this notifier is the phone
number to be dialled.
Moving through the menu items is possible by using the up/ down buttons. The effect of these
actions is scrolling the menu up/ down.
If the highlighted item is “Active” then pressing the right button will check or uncheck the item.
If the highlighted item is “<phone number>” then pressing the right button will redirect the user to
the edit phone number screen. The “<phone number>” means that the current set phone number