User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
AyTerminal
<AyApp 1
<AyApp 2
<AyApp 3
AyTerminal
<AyApp 4
Info
Default sett
AyApplicati
Default set
FW Update
<AyApp 1
Figure 5-65 AyApplication menu – jumbo mode
AyApplication
changed.
REBOOTING!
AyApplication
changed.
REBOOTING!
Figure 5-66 Rebooting message box in standard and jumbo mode
5.8.3.1Setting the AyApplication to default settings
Selecting the “Default settings” item triggers setting all settings of the running AyApplication to their
defaults. A sequence of message screens is shown like in Figure 5-67. The AyTerminal settings
like time and date are not influenced by this action.
Setting to
default… Please
wait.
Setting to
default...Ple
ase wait.
New settings
saved.
Rebooting...
New
settings
saved.
Rebooting...
Figure 5-67 AyApplication warning message – standard and jumbo mode
The settings which are influenced by this reset to default are:
Setting Default value
Application version Current AyApplication version
All AySnapOns deactivated
Time Sync deactivated
AyServer Periodic Polling deactivated
AyServer Periodic Polling Interval 60s
Nickname John Doe
Deactivation code Up, Right, Down, Left
Audio - mute Deactivated
Audio – Voice Call volume Maximum (100)
Audio – Button Click volume Maximum (100)
Audio – Alarm volume Maximum (100)
Audio – Ring tone volume Maximum (100)
Audio – selected ring tone 3d in the list
Audio – headset Deactivated