User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
• APN
• DNS
• NET username
• NET password
• AyServer URL
This information can not be changed via AyTerminal.
Bootloader: 1r15
MainFW: 1r28
MSISDN:
[phone]
APN:
MSISDN:
[phone]
90
APN:
Figure 5-71 Info message – standard and jumbo mode
If the information is not fitting in one screen (one screen has 20 lines in standard and also jumbo
mode) then the text is split in more message boxes. Going from one message box to another is
possible by pressing the OK button.
5.8.4Audio
The “Audio” menu provides the user to set the AyTerminal audio settings.
Using the “Headset” item the user activates or deactivates the connected headset.
The user has the possibility to set up the volume for
• alarm siren
• button clicks
• voice calls
• ring tone
or to
• mute all sound feedback
The volume can be defined in 5 steps where the first step always means mute (0%, 20%, 40%,
60%, 80% and 100%). By default volume settings for call, siren and ring tone are set to 100% and
for button to 40%.
If the user activates the “Mute all” item, all sound feedback is muted, but the set values are still
stored on the AyTerminal.
For ring tones there is a submenu where the user can additionally choose the ring tone. “Ring tone
3” is set by default.
Audio
Call
Button
Siren
Mute all
Audio
Ring tone
Mute all
Call
Headset
Call
vol.:
25
Figure 5-72 Audio menu – standard mode
Audio
Mute all
Button
Call
Audio
Siren
Ring tone
Headset
Call
vol.:
25
Figure 5-73 Audio menu – jumbo mode