User's Manual

User Manual for AyAlarm AyTerminal
V2.1 AyAlarm application
***_
OK
1
0
Old PIN
***_
OK
1
0
New PIN
***_
OK
1
0
Re-enter PIN
Figure 5-81 Change PIN screens – jumbo mode
If user enters wrong pin, user will receive message about wrong pin (Figure 5-82 Incorrect PIN
message). After entering wrong PIN three times user will receive message shown in Figure 5-81.
Incorrect PIN.
Try again.
Incorrect
PIN.
Try again.
Figure 5-82 Incorrect PIN message
No tries left.
Option blocked.
No tries left
. Option
blocked.
Figure 5-83 Message after entering wrong PIN three times
User then has to restart AyTerminal. On next start up of AyTerminal user will have to enter PUK
number.
5.9Turning off the AyTerminal
If a mode is activated and has control over the device then first deactivate the mode. After
deactivating the mode by entering the deactivation code, the AyApplication menu will be displayed.
As soon as 4
th
key is entered, deactivation code is completed. After the main menu is displayed ,
select “Turn Off” item in order to turn off the Ay. Message box will appear asking for turning off
confirmation, see Figure 5-84. After pressing accept button new message is shown informing
about Ay settings being saved, see Figure 5-85.
NOTE: Do NOT connect charger while TURNING OFF the AyTerminal because the data that is being
saved might be corrupted!
Turning off
AyTerminal.
Confirm?
Turning off
AyTerminal.
Confirm?
Figure 5-84 Confiramtion for turning off AyTerminal