Data Sheet for Product

5
Smart Infrastructure A6V10301051_m_en_--
2021-12-06
Detector base DB110R (parameter set 2)
Function:
● Conventional detector base with resistor for setting the parameters of all point
detectors of the 110series
● Selects parameter set2 within the point detector
Use:
● For recess-mounted supply lines
● For surface-mounted supply lines with cables up to max. Ø8mm
Detector base DB110RD (parameter set 2) for BS 5839-1
Function:
● Conventional detector base with parameter set resistor and diode for all point
detectors of the 110series
● Selects parameter set2 within the point detector
Use:
● For recess-mounted supply lines
● For surface-mounted supply lines with cables up to max. Ø8mm
Designation plate FDBZ291
● For labeling with the location address
● Can only be used without detector base seal FDBZ295
Detector base seal RS720
● For achieving a higher IP protection category
● Mounted between detector base and ceiling
Detector locking device LP720
● For protection against theft of the point detector
● Set screw M3x12mm prevents the point detector being unscrewed from the
detector base
● Point detector can only be removed with the appropriate Allen key