Local Service Organization Service Manual BE INSPIRED SL65 V1.1 Version 1.0 1.1 Date 08.09.
SIEMENS PTE LTD SL65 Level 2 Service Manual Table of Contents 1 GPRS (GENERAL PACKET RADIO SERVICE)……….3 2 K JAVA APPLICATION……………………………………………………………….4 3 KEY FEATURES……………………………………………………………………….5 4 COMPARISON WITH PERVIOUS PRODUCT...……………………………………8 5 ACCESSORIES……………………………………………………………………......9 6 UNIT DESCRIPTION SL65....................................................................................11 7 DISASSEMBLY OF SL65......…………………………………………..…………..13 8 REASSEMBLY OF SL65….
SIEMENS PTE LTD SL65 Level 2 Service Manual 1 GPRS (General Packet Radio Service) GPRS is a new non-voice value added services that allows information to be sent and received across a GSM mobile telephone network. It supplements today’s Circuit Switched Data (CSD) and Short Message Services (SMS). GPRS involves overlaying a packet based air interface on the existing circuit switched GSM network. This gives the option to use a packet-based data service.
SIEMENS PTE LTD SL65 Level 2 Service Manual 2 K-Java Application Java-based game system Java Application Manager (JAM) Application launcher download manager. and yes Supports HTTP-based OTA download of applications over GPRS and CSD. RAM for Java applications Available RAM for Java applications (i.e. Program code and data) during application runtime: yes Minimum 100 Kbytes (Has to be taken as working assumption for application development). Goal: 145 Kbytes as SL45i (not committed) MIDP 1.
SIEMENS PTE LTD SL65 Level 2 Service Manual 3 Key Features Bands Battery Stand-by Time Talk Time SIM Card GSM Antenna Dimensions Volume Weight Charging time Storage Receiver Sensitivity • • • • • • • • • • Triple Band E-GSM 900 / GSM 1800 / GSM 1900 EGSM Phase 2 / phase 2+ GPRS Multi Class 10 JavaTM Wireless Technology, MIDP 2.0 Li-Ion Battery Pack Nominal Voltage : 3.
SIEMENS PTE LTD SL65 Level 2 Service Manual Display 12-Block Keypad 6-Block Keypad • • • • • • • • • • • • • • • • • • • • • • • • Side Key Acoustics • • • • • • • • Camera Copyright © Siemens Pte Ltd. All Rights Reserved ICM MP CCQ SLI RHQ • • • • Type: Full Graphic Resolution: 130 x 130 Pixel No. of colours: 65K Technology: TFT (Epson) Active area: 30.03mm x 30.03mm Pixel size: 0.077mm x 0.231mm.
SIEMENS PTE LTD SL65 Level 2 Service Manual H.263 + AMR for audio encoding Connectivity Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual 4 Comparison with Previous Product Feature CX65 Supported Systems Triple Band (EMEA, APAC) GSM 900/GSM1800/ GSM1900 (NAM) GSM 850/GSM1800/ GSM1900 Stand-by Time ≥ 220h (approx. 3mA quiescent current) Talk Time ≥ 4,5 h (approx. 150mA average current for lowest TXpower level) Battery Technology Li-Ion Battery Pack Battery Capacity NOMINAL CAP.: 700 MAH Weight Approx. 90 g Volume Approx. 78 cm3 Length 108 mm Width 44…47 mm Thickness 17…18 mm SIM Plug-In 1.
SIEMENS PTE LTD SL65 Level 2 Service Manual 5 Accessories For SL65, the following accessories will be available.
SIEMENS PTE LTD SL65 Level 2 Service Manual 5.1 SL65 Interface to accessories The phone has got a full compatible interface to accessories. The I/O-Connector (Lumberg-(slim)-connector) shall be in the same position as in the 55 series. All shown interfaces are for car-cradle. Interfaces for Belt-Clip will not be necessary. Slim Lumberg I/O Connector Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual 6 Unit Description of SL65 The SL65 is a Slider Phone with an integrated camera. The housing parts are made of lacquered plastic-parts (1-shot-molding; 2 colours). The mechanical concept is based on the SL55. The two colour concept is realized by single parts, which are joined by gluing. The silver parts are with a non-glossy coating, the coloured parts are with a high glossy surface. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual 6.1 Exploded View of SL65 Upper case shell Operator Key Earphone Keypad 5er Display module Joystick cap Screws slider Slider plate Base upper case PCB Keypad 12er Camera module Vibra alert unit Antenna housing Carrier housing with microphone Screws Battery cover Li-ion Battery 700 mAh Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual 7 Disassembly of SL65 Note: ESD concept; the internal circuits will be more susceptible to ESD because of the use of exchangeable housing. The construction of the internal block must be/is designed, in the best possible way, to protect the circuit against sparks. The keypad must be completely closed to prevent any occurrence of an ESD disruptive discharge. The SIM contacts may be open, thus reachable for ESD contact discharge.
SIEMENS PTE LTD SL65 Level 2 Service Manual Step 5 Remove Battery – Lift the battery. Step 6 Step 7 Remove SIM card Unscrew the 2 screws (as indicated) with T5 Plus screw driver (set Torque = 16 cNm). Step 8 Remove Antenna housing. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Step 9 Remove Vibra alert unit. Step 10 Remove Carrier housing with microphone. Step 11 Remove Microphone. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Step 12 Remove PCB. Step 13 Remove Keypad 12er. Step 14 Separate Base upper case and Upper case shell. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Step 15 Unscrew the 2 screws (as indicated) with T5 Plus screw driver. Step 16 Step 17 Remove Display module. Place a protective foil over the display module. Remove Joystick cap. Step 18 Remove Earphone and Keypad 5er. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Step 19 Remove Camera module. Step 20 Fully disassembled S65 Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual 8 Reassembly of SL65 For the reassembly of the SL65, reverse the disassembly procedures from Step 20 to Step1. However there are some areas to be taken note of during reassembling of the phone. During the installation of the SIM card, make sure that the SIM card is inserted properly and that the golden contact area is facing downwards. Insert the SIM card downwards to lock the SIM card into position.
SIEMENS PTE LTD SL65 Level 2 Service Manual 9 Mobile Software Programming The common mobile software available is divided into language groups. However, this software does not contain the specific settings, such as ringing tones, greeting text, and short dial list etc., required by the operator or service provider. Therefore, it is common to have some menu item(s) differ in different variants or are not visible at all.
SIEMENS PTE LTD SL65 Level 2 Service Manual 9.1 Mobile Software Updating The software of the mobile, R65 series is loaded from a PC directly. Hardware interconnection between the mobile and the PC is shown in Figure 1. Because of the new type of external connector used in X55 series (Slim-Lumberg type) an additional adaptor cable between mobile and boot adaptor is required. In Table 1 the hardware requirements are listed.
SIEMENS PTE LTD SL65 Level 2 Service Manual 10 Siemens Service Equipment User Manual Introduction Each LSO, repairing Siemens handsets, must ensure that the quality standards are observed. Siemens has developed an automatic testing system which performs all necessary measurements. This testing system is known as: Siemens Mobile Service Equipment Each mobile phone has to be tested with the GRT-Software. The Service Partner is responsible to ensure that every required hardware is available.
SIEMENS PTE LTD SL65 Level 2 Service Manual 11 JPICS (Java based Product Information Controlling System) Overview The following functions are available for the LSO: • General mobile information • Generate PINCODE • Generate SIMLOCK-UNLOCK-Code • Print IMEI labels • Lock, Unlock and Test the BF-Bus Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual The access to the JPICS server which is located in Kamp-Lintfort is protected by chip card and in addition using secure socket layer (SSL) connection. The JPICS server is only available for authorized users with a specially coded chip card. These chip cards and the administration of the JPICS web server and the PICS database-server can only be provided by the JPICS-TRUST-Center of the responsible department in Kamp-Lintfort.
SIEMENS PTE LTD SL65 Level 2 Service Manual Installation overview The following installation description assumes that a web browser is already installed. JPICS is tested with the following browsers 1. Internet Explorer Version 5.5 and higher 2. Netscape Version 6 and higher For further information regarding supported browsers, browser version and supported operating systems, see the Sun FAQ's.
SIEMENS PTE LTD SL65 Level 2 Service Manual In the module “Generate Codes“you can choose to generate: - Master – Phonecodes - Simlock Unlock – Codes Master - Phonecodes The Master – Phonecode is used to unlock blocked mobiles. Master – Phonecodes can only be supplied for mobiles which has been delivered in a regular manner. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Simlock Unlock - Code The Simlock-Unlock-Codes can only be generated if the following conditions are given: - Mobile must have an active Simlock inside. - The user must be given the authorization to obtain Simlock Unlock- Codes for the variant of the operator to which the mobile was delivered last time. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Printing IMEI label The module “Print IMEI label” offers the possibility to re-print IMEI labels for mobiles. You are able to print 1 label in just one step. To prevent that misaligned labels are being printed, the setting "Print test labels = 9" is activated as default. After having printed a well-aligned test label you can uncheck the setting and print the correct label.
SIEMENS PTE LTD SL65 Level 2 Service Manual 12 International Mobile Equipment Identity, IMEI The mobile equipment is uniquely identified by the International Mobile Equipment Identity, IMEI, which consists of 15 digits. Type approval granted to a type of mobile is allocated 6 digits. The final assembly code is used to identify the final assembly plant and is assigned with 2 digits. 6 digits have been allocated for the equipment serial number for manufacturer and the last digit is spare.
SIEMENS PTE LTD SL65 Level 2 Service Manual 13 General Testing Information General Information The technical instruction for testing GSM mobile phones is to ensure the best repair quality. Validity This procedure is to apply for all from Siemens AG authorized level 2 up to 2.5e workshops. Procedure All following checks and measurements have to be carried out in an ESD protected environment and with ESD protected equipment/tools. For all activities the international ESD regulations have to be considered.
SIEMENS PTE LTD SL65 Level 2 Service Manual Incoming check and check after assembling: !! Verify the customers fault description!! ¾ After a successful verification pass the defective item to the responsible troubleshooting group. ¾ If the fault description can not be verified, perform additional tests to save time and to improve repair quality. - Switch on the device and enter PIN code if necessary unblock phone. - Check the function of all keys including side keys.
SIEMENS PTE LTD SL65 Level 2 Service Manual GSM Test: All tests has to be performed with GRT Test software ¾ Connect the mobile/board via internal antenna (antenna coupler) and external antenna (car cradle) to a GSM tester. ¾ Use a Test SIM. ¾ Skip GSM 900/GSM1800 or GSM1900 test cases if not performed by the mobile phone. Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Final Inspection: The final inspection contains: 1) A 100% network test (location update, and set up call). 2) Refer to point 3.3. 3) A random sample checks of: - Data reset (if required) - Optical appearance - complete function 4) Check if PIN-Code is activated (delete the PIN-Code if necessary). Basis is the international standard of DIN ISO 2859. Use Normal Sample Plan Level II and the Quality Border 0,4 for LSO. Remark: All sample checks must be documented.
SIEMENS PTE LTD SL65 Level 2 Service Manual Annex 1 Test SIM Card There are two different “Test SIM Cards” in use: 1) Test SIM Card from the company “ORGA” Pin 1 number: PUK 1 : 0000 12345678 Pin 2 number: PUK 2 : 0000 23456789 2) Test SIM Card from the company “T-D1” Pin 1 number: PUK : 1234 76543210 Pin 2 number: PUK 2 : 5678 98765432 Copyright © Siemens Pte Ltd.
SIEMENS PTE LTD SL65 Level 2 Service Manual Annex 2 Battery Date Code overview Varta Date code example N 9 A VA Year (N:2001, O:2002...) Month (1:Jan, 2:Feb,…9:Sep, O:Oct, N:Nov, D:Dec) Revision Letter (A, B,…) Hitachi / Maxwell Date code example Supplier Code (Maker’s marking) N 9 A MX Year (N:2001, O:2002...) Month (1:Jan, 2:Feb,…9:Sep, O:Oct, N:Nov, D:Dec) Revision Letter (A, B,…) Sanyo Date code example Supplier Code (Maker’s marking) N 9 A SY Year (N:2001, O:2002...
SIEMENS PTE LTD SL65 Level 2 Service Manual Copyright © Siemens Pte Ltd.