Operation Manual

Timer en
11
5. Press the start/stop button to start.
The appliance starts the operation. The cooking time
counts down on the display.
Notes
■ When you switch on the appliance, the highest
microwave output always appears in the display as a
suggestion.
■ If you open the appliance door when the appliance
is in use, the fan may continue to run.
Cooking time elapsed
An audible signal sounds.
Operation has finished.
Stopping the audible signal early:
Touch the 0 button.
Note: After touching the 0 button, the timer function
appears; after a short time, it automatically disappears.
If you touch the 0 button again, the timer function will
disappear instantly.
Press the On/Off button to switch off the appliance.
Changing the cooking time
This can be done at any time.
Use the rotary selector to change the cooking time.
The operation continues.
Changing the microwave output
This can be done at any time.
Use the ¾ arrow to change the microwave output.
Use the rotary selector to set the required microwave
output.
The cooking time remains unchanged.
The operation continues.
Note: If the set cooking time exceeds the maximum
time for the microwave output of 900 W, it is reduced
automatically. The operation stops. Press the start/stop
button to start the operation.
OTimer
Timer You can use the timer as a kitchen timer. The timer runs
alongside other settings. You can set it at any time,
even if the device is switched off. It has its own audible
signal so that you can tell whether it is the timer or a
cooking time which has elapsed.
Setting the timer
The maximum setting is 24 hours.
The higher the value, the longer the time intervals.
1. Press the 0 button.
The timer is displayed.
2. Use the rotary selector to set the timer duration.
3. Press the 0 button to start.
Note: The timer will also start automatically after a
few seconds.
The timer duration counts down. The display switches
back after a short time. A timer symbol and the elapsed
time are shown in the status bar.
An audible signal sounds once the timer duration has
come to an end. Use the 0 button to cancel the audible
signal early.
Notes
■ The timer remains visible in the display if the
appliance is switched off.
■ If an operating mode is running, touch the 0 button
to display the timer. The timer duration is displayed
for a few seconds and can be altered.
Changing the timer
Touch the 0 button to change the timer duration. The
timer duration is displayed – use the rotary selector to
change it.
Cancelling the timer
If you want to cancel the timer, reset the duration on the
timer to zero. Once the change has been applied, the
symbol is no longer lit up.
PQFO TUBSUTUPQ

PLQV:

PQFO TUBSUTUPQ


7LPHUPLQV