Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 15 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
3.2 Rack Assembly
3.2.1 Rack Assembly Mounting Position
The ST950 Outercase is configured with a 19 inch swing frame, to which the ST950 Rack
Assembly is mounted. The Rack Assembly will be positioned in the Swing Frame as shown
in Figure 1. Information on exact positioning of the ST950 Rack Assembly should be sought
from manufacturing drawing detailed in the related document section of this handbook. The
ST950 Rack Assembly should not be ordered separately as it is included in the Outercase,
ordered from Table 1. The components mounted within the ST950 Rack Assembly are
shown in Figure 2.
Figure 2 - ST950 Rack Assembly
Please Note, Figure 2 shows the ST950 Rack Assembly with ST950LED Components. The
ST950LV Rack Assembly components appear in the same positions.