Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 22 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
3.6 The Manual Panel
The Manual Panel is contained within a secure compartment in the top left hand corner of
the controller cabinet. Access to the manual panel may be gained via the manual panel
access door or by opening the controller cabinet main door. The manual panel forms part of
the Outercase, chosen from Table 1, and therefore should not be specified separately.
The detector fault monitoring LED indicator is repeated from the manual panel to the outer
case by the use of a lens. The lens kit and should be ordered separately, if the unit is
required. Please refer to the parts listing for this item
Instruction on the fitting of the DFM Lens kit should be sought from drawing No.
667/CH/27104/000.
The 34 way ribbon cable from manual panel connects into socket PL3 on the CPU Card;
marked Manual Panel.
Figure 7 – ST950 Manual Panel