Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 26 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
3.8 Single detector backplane
If preferred, Single Detector Backplane may be fitted to the ST900. Single Detector
Backplane do not form part of the Outercase, chosen form Table 1, and therefore should be
specified separately, The optimisation of the Single Detector Backplane follows the same
sequence of positioning as that detailed in section 3.7.
Power for the Single Detector Backplanes is obtained from Detector Power Supply Kit, as
detailed in paragraph 3.12. Please refer to Figure 10 and 11 for the Single Detector
Backplane connection scheme. Please also refer to the parts listing for this item.
Figure 10 – Single Back Plane wiring positions
Figure 11 – Single Detector Backplane Connection Scheme