Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 62 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
4.8 Single Detector Backplane
Single Detector Backplane do not form part of the Outercase, chosen form Table 4, and
therefore should be specified separately; if they be preferred over Intelligent Detector
Backplanes. The optimisation of the Single Detector Backplane follows the same sequence
of positioning as that detailed in section 4.7 The Single Detector Backplanes occupy the
position shown for Intelligent Detector Backplane. Power for the Single Detector Backplanes
is obtained from detector power kit, as detailed in paragraph 4.12. Please refer to Figure 48
and 48 for the Single Detector Backplane connection scheme.
Figure 48 – Single Detector Backplane
Figure 49 – Single Detector Backplane connections