Specifications

Mobility and Logistics, Traffic Solutions
Sopers Lane, Poole, Dorset, BH17 7ER
Security classification Unrestricted Page 64 of 83
Version 2 Status Released
Last Editor Harry Smyth Date 09/12/2014
Document Name Configuration Control Document No. 667/CC/45950/000
Copyright © Mobility 2014. All Rights Reserved. Mobility is a division of Siemens Plc
4.10 Loop Termination Cards
The following section defines the order of allocation for the detector loop termination Cards
starting at the bottom left of panel No. 2. These boards are directly connected to the
Intelligent Detector Backplanes via a twisted pair ribbon cable Please note the Loop
termination PCB is part of the intelligent Detector Backplane Kit and therefore it is not
required to order this item separately.
Figure 51 – Loop Termination Card Optimisation
11
LT5
Panel No. 1
(Always fitted)
Panel No. 2
(Always fitted)
Panel silk
screen
labelling
Figure 2 ELV Cabinet Loop termination PCB allocations
12
LT6
9
LT3
10
LT4
7
LT1
8
LT2
5
LT5
6
LT6
3
LT3
4
LT4
1
LT1
2
LT2
Ribbon
cable
Terminal
block
Loop termination
board
Ribbon cable