Specifications

Mobility and Logistics, Traffic Solutions

Sopers Lane, Poole, Dorset, BH17 7ER

Security classification Unrestricted Page 7 of 83

Version 2 Status Released

Last Editor Harry Smyth Date 09/12/2014

Document Name Configuration Control Document No. 667/CC/45950/000

1 INTRODUCTION

1.1 Purpose

This ST950 Family Controller Configuration Document is designed to provide general

guidelines to Field Service Controller Configuration Engineers when configuring

controllers, at both controller requisition time and at final assembly in depots. Additionally,

the document will assist in the manufacture of controllers; including final factory build and

subsequent confirmation, prior to delivery to Field Service.

Ongoing development means that some of the delivered items may differ

in detail from the photographs included in this handbook.

1.2 Scope

This document describes the configuration of the two base units within the ST950 family

of controllers; ST950 mains controller, referred to as the ST900LV and ST950 48V

controller referred to as the ST900ELV. The ST950LED controller is sufficiently like the

ST900LV controller to allow its configuration to be described in this handbook, in the

ST900LV sections. Where necessary the configuration particular to the ST900LED is

detailed.

The configuration of export controllers is not detailed by this document. The ordering and

configuration of Cuckoo unit is not detailed in this document.