Specifications

Mobility and Logistics, Traffic Solutions

Sopers Lane, Poole, Dorset, BH17 7ER

Security classification Unrestricted Page 76 of 83

Version 2 Status Released

Last Editor Harry Smyth Date 09/12/2014

Document Name Configuration Control Document No. 667/CC/45950/000

4.15 Stratos Outstation

This unit is not included in the Outercase ordered from Table 4 and therefore must be

specified separately. Please refer to the family tree document for the Stratos Outstation

(667/DZ/52250/ETC) when specifying the make-up of the unit. Section 4.7 explains the

location the Stratos Outstation unit can take within the ST950ELV cabinet.

Power for the Stratos Outstation can be provided by utilising one of the mini circuit breakers

within the Master Switch Assembly. One mini circuit breaker will be installed for the OTU

(Stratos Outstation); however, a second and third kit may be fitted using kit of parts

667/1/27121/000. Positions for these additional power facilities are shown on

667/GA/27121/000. With reference to Figure 73, mains supply power for the Stratos

Outstation is connected via a standard IEC C13 mains lead. The other boards in the system

are powered over the RJ45 GSPI cables. To provide Lamp Supply monitoring on the Stratos

Outstation the Lamp Supply Monitor Port is used.

Figure 73 - Power for Stratos Outstation Unit

If the internal backup battery is fitted the Stratos Outstation can be mounted in

any orientation apart from front panel facing down.

Mains

Connection

to Stratos

Outstation

Lamp

Supply

Monitor

Port