Installation Instructions
Chapter 2 - Receipt of Delivery
Unpacking and Lifting the Drive
13 | 82
Siemens Industry, Inc.
Smart Infrastructure
Siemens BT300 HVAC Drive
Installation Instructions
DPD01148
2019-05-29
Unpacking and Lifting the Drive
The weights of the drives vary greatly according to the size. You may need to use
special lifting equipment to remove the drive from its package. Note the weights of
each individual frame size in the table below.
Table 4: Frame Weights.
Frame
Weight in kgs (lbs)
FS4
6.0 (13.2)
FS5
10.0 (22)
FS6
20.0 (44.1)
FS7
37.5 (82.7)
FS8
66.0 (145.5)
FS9
108.0 (238.1)
If you require special lifting equipment, see the figure in the
Lifting frames FS8 and
FS9
section for lifting instructions.
Lifting Frames FS8 and FS9
NOTES:
1. First detach the drive from the pallet it has been bolted to.
2. Place the lifting hooks symmetrically in at least two holes. The lifting device
must be able to carry weight of the drive.
3. The maximum allowed lifting angle is 45 degrees.