Installation Instructions

ogies
2017-09eading 1_noNr" \* MERGEFORMAT Chapter 2 - Receipt of Delivery
Accessories
16 | 82
Siemens Industry, Inc.
Smart Infrastructure
Siemens BT300 HVAC Drive
Installation Instructions
DPD01148
2019-05-29
Size FS6
Table 7: Contents of Accessories Bag, FS6.
Item
Quantity
Purpose
M4 × 20 screw
10
Screws for power cable clamps (6) and
grounding clamps (4)
M4 × 16 screw
3
Screws for control cable clamps
M4 × 8 screw
1
Screw for optional grounding
M5 × 12 screw
1
Screw for drive external grounding
Control cable grounding lamella
3
Control cable grounding
EMC cable clamps, size M40
2
Clamping power cables
Grounding clamp
2
Power cable grounding
‘Product modified’ label
1
Information about modifications
Cable grommet, hole diameter 1.3 in. (33.0 mm)
1
Cable run-through sealing
Cable grommet, hole diameter 1.6 in. (40.3 mm)
2
Cable run-through sealing
Type 12/IP54: Cable grommet, hole diameter 0.99 in.
(25.3 mm)
3
Cable run-through sealing
NOTE:
Dynamic braking and brake resistor is not supported in the BT300 Drive.
Size FS7
Table 8: Contents of Accessories Bag, FS7.
Item
Quantity
Purpose
M6 × 30 slotted nut
6
Nuts for power cable clamps
M4 × 16 screw
3
Screws for control cable clamps
M6 × 12 screw
1
Screw for drive external grounding
Control cable grounding lamella
3
Control cable grounding
EMC cable clamps, size M50
3
Clamping power cables
Grounding clamp
2
Power cable grounding
‘Product modified’ label
1
Information about modifications
Cable grommet, hole diameter 1.98 in. (50.3 mm)
3
Cable run-through sealing
Type 12/IP54: Cable grommet, hole diameter 0.99 in. (25.3
mm)
3
Cable run-through sealing