Installation Instructions
Chapter 3 - Mounting
Cooling
26 | 82
Siemens Industry, Inc.
Smart Infrastructure
Siemens BT300 HVAC Drive
Installation Instructions
DPD01148
2019-05-29
Flange Mount
The drive can also be recessed into the cabinet wall or similar surface. A special
flange mount option
is available for this purpose. For further information see the
Siemens BT300 Flange Mount Kits for Frames FS4 to FS7 Mounting Instructions
(DPD01156).
Cooling
The drive produces heat when operating and is cooled down with air circulated by a
fan. Ensure that enough free space is left around the drive for air circulation and
cooling.
Ensure that the temperature of the cooling air does not exceed the maximum
ambient operating temperature of the drive. See
Chapter 7
–
Technical Data
for
more information.
A
Clearance around the drive (see also B)
B
Distance from one drive to another or distance to cabinet wall
C
Free space above the drive
D
Free space below the drive
Figure 10: Installation Space.