Installation Instructions
Chapter 5 - Control Unit
I/O Cabling and Fieldbus Connection
57 | 82
Siemens Industry, Inc.
Smart Infrastructure
Siemens BT300 HVAC Drive
Installation Instructions
DPD01148
2019-05-29
Figure 45: Stripping an RS-485 Cable.
3. Strip the cable at such a distance from the terminal that you can attach it to the
frame with the grounding clamp. Strip the cable at a maximum length of 0.6 in
(15 mm).
Do not strip the aluminum cable shield!
4. Connect the cable to its appropriate terminals on the Siemens BT300 HVAC
Drive standard terminal block, terminals A and B (A = negative, B = positive).
See the following figure.
1
5
mm (.6 in)
9188.emf