Installation Instructions
Chapter 6 - Commissioning
Installation in an IT System
74 | 82
Siemens Industry, Inc.
Smart Infrastructure
Siemens BT300 HVAC Drive
Installation Instructions
DPD01148
2019-05-29
1. Find the connector in the accessories bag. Remove the main cover of the drive
and locate the place for the connector next to the fan. Push the connector in its
place. See the following figure.
Figure 60: Placing the Connector.
2. Remove the extension box cover, the touch shield, and the I/O plate with I/O
grommet plate. Locate the EMC jumper on the EMC board (see magnification in
the following figure) and remove it.
Connector
9063.emf