Operating Instructions

Application Features (Electronic Bypass Only)
Bypass
-
Specific Parameters
32
Siemens Industry, Inc. BT300 Bypass Operator's Manual DPD01391
Building Technologies 2017-09-28
Application Features (Electronic Bypass Only)
During the bypass wizard execution, if the unit is defined to have the Electronic
Siemens BT300 Bypass, then the application features can be enabled.
When the Electronic Bypass is enabled in the drive, digital inputs and relay outputs are
configured automatically as listed below. The Electronic Bypass is enabled by setting
the Bypass parameter to Electronic value. If the Bypass option is disabled, digital
inputs and outputs are set back to factory settings.