Operating Instructions
Chapter 4 - Parameters and Menu Structure
Diagnostics (M4)
118 | 187
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Smart Infrastructure
2019-05-29
Fault History (M4.4)
Fault history can contain a maximum number of 40 faults. Once the count of 40 has been reached, the FIFO
method is used to store the newest faults. On each fault in memory, you will also find additional information
about the drive when the fault occurred. See
Chapter 5, Fault Tracing
for more information.
Total Counters (M4.6)
Total Counters contain all the totalized counters for energy usage, run time, power on time, and even start
command count. These setting are not resettable.
The total counters are presented in the following table:
Table 75: Total Counters.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
M4.6.1
Energy Counter
Varies
2291
The amount of energy taken from
the supply.
NOTE: This is not resettable.
Highest energy unit that the
display shows is MW
(megawatts). If the counter scrolls
past 999.9 MW, no unit will
display.
See
Energy Counter (P4.7.1)
for
resettable version.
M4.6.3
Operating Time
y d hh:mm
2298
Displays the control units
operating time in years, days,
hours:minutes.
NOTE:
This is not resettable.
See
Operating Time (P4.7.3
) for
resettable version.
M4.6.7
Run Time
y d hh:mm
2293
Displays the motor run time in
years, days, hours:minutes
M4.6.11
Power On Time
y d hh:mm
Displays the power on time in
years, days, hours:minutes
M4.6.15
Start Cmd Counter
2295
Displays the number of times the
power unit has been started.
Trip Counters (M4.7)
Trip Counters contain the reset objects for energy usage and time clock, and are presented in the following
table: