Operating Instructions
Chapter 4 - Parameters and Menu Structure
I/O and Hardware (M5)
119 | 187
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Smart Infrastructure
2019-05-29
Table 76: Trip Counters.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
M4.7.1
Energy Counter
Varies
2296
The amount of energy taken from
the supply.
NOTE: This is resettable. Highest
energy unit that the display shows
is MW (megawatts). If the counter
scrolls past 999.9 MW, no unit will
display.
See
Energy Counter (M4.6.1)
for
non-resettable version.
M4.7.3
Operating Time
y d hh:mm
2299
Displays the control units
operating time in years, days,
hours:minutes.
NOTE:
This is resettable.
See
Operating Time (M4.6.3)
for
non-resettable version.
Software Info (M4.8)
Software Info contains software/firmware specific information. Software Package (M4.8.1) is vital
information for Technical Support when troubleshooting issues.
The software info settings are presented in the following table:
Table 77: Software Information Settings.
Structure
Parameter
Unit
Min
Max
Default
ID
Description
M4.6.1
Software Package
FW0183V012
2524
Software Package (Drive
Firmware Revision String).
M4.8.4
System Load
%
0
-100
2300
Load on control unit CPU.
M4.8.5
Application Name
HVAC
2525
Name of Application.
M4.8.6
Application ID
1114
837
Application ID.
M4.8.7
Application Ver.
117
838
Application Version.
I/O and Hardware (M5)
Under this menu are the following sections related to the I/O and hardware of the drive:
Table 78: I/O and Hardware.
Menu and Parameter Group
Description
Basic IO (M5.1)
Provides status of I/O found on Slot A and Slot B.
Slot C (M5.2)*
Provides status of I/O found on Slot C.
Slot D (M5.3)*
Provides status of I/O found on Slot D.
Slot E (M5.4)*
Provides status of I/O found on Slot E.
Real Time Clock (M5.5)
Configuration and status of the real time clock.
Power Unit Settings (M5.6)
Configuration and status of the fan and sine filter.
Keypad (M5.7)
Configuration of keypad specific information.
RS-485 (M5.8)
Configuration and status of the RS-485 type fieldbus protocols.
Ethernet (M5.9)
Configuration and status of the Ethernet type fieldbus protocols.