Operating Instructions

Chapter 1 - User Interfaces on Siemens BT300
Drive Keypad
13 | 187
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Smart Infrastructure
2019-05-29
• Location: Indicates the Menu name, Sub-menu name, or parameter name that is currently selected.
• ID: Indicates the parameter ID (if applicable) for the parameter selected.
• Tree: Indicates the menu, sub-menu, or parameter tree structure number.
NOTE:
This field always shows standard English digits regardless of the language
selected by Language Selections (P6.1).
• Group: Indicates the group, sub-group, or parameter name that is in the list. The highlight represents the
selected item.
• Count: Indicates the count of items listed in the group or sub-group.
The data on the control keypad are arranged in menus and sub-menus. Use the UP and DOWN
arrows to move between the menus. Enter the group/item by pressing the button and return to the
previous level by pressing the Back/Reset button.
Using the Keypad
This section covers the editing of parameter values, resetting of faults, accessing the control page, obtaining
help related to parameters, and configuring the items for the Favorites menu.
Editing Values
NOTES:
1. Some parameters cannot be changed when the drive is in the Run state.
2. Some parameters require a power cycle to implement changes.
Change the value of a parameter by using the following procedure:
1. Locate the parameter. See Chapter 4 for parameter details.
2. Highlight the parameter and complete one of the following:
Press the button to enter the parameter choice menu, which contains Edit, Help, and Add To (or
Remove From) Favorites. Highlight Edit and press the button a second time.
Press the button to enter directly into the parameter editing mode.
3. Set the new value using the or buttons.
NOTE:
You can move from digit-to-digit using the or buttons if the value is
numerical.