Operating Instructions

Chapter 3 - Start-up Information
Wizards
22 | 187
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Smart Infrastructure
2019-05-29
Wizards
Wizards are available in the Quick Setup (M1) menu. The wizards assist you with various start-up and
commissioning functions. There are five wizards available in the BT300 HVAC Drive that prompt for essential
information needed for the following:
• Start-up Wizard - Easy commissioning of the drive.
• PID Mini-Wizard - Proper configuration of internal PID Loop Controller 1.
• Multi-Pump Wizard - Proper configuration of the Multi-pump application.
• Fire-Mode Wizard - Proper configuration of the Fire-mode.
• Bypass Wizard - Proper configuration of the bypass options (if connected).
Startup Wizard (P1.19)
The Startup Wizard prompts you for the essential information needed by the drive so that it can start
controlling the output as desired. Once power is connected to the BT300 HVAC Drive, the Startup Wizard
should run automatically. If it is not running, it can be activated in the Quick Setup (M1) menu or by
completing Restore Factory Defaults (P6.5.1)
The following steps are required to successfully complete the Startup Wizard:
Step
Parameter/Question
Settings
1
Language Selections (P6.1)
Select the icon for the language you want applied to the keypad.
This varies depending upon the language package installed.
2
Daylight Saving (P5.5.5)
Select the Daylight Saving Rule
1 = Off
2 = EU
3 = US
4 = Russia
3
Time (P5.5.2)
Specify the current time of day in the following format: hh:mm:ss
where
h = hour, m = minute, s = seconds.
4
Year (P5.5.4)
Specify the current year in the following format: yyyy where
yyyy = 4-digit year.
5
Date (P5.5.3)
Specify the current date in the following format: dd.mm where
dd = 2-digit day, mm = 2-digit month.
6
Startup Wizard?
Specify if the Startup Wizard should be activated: Yes, No
If the option Yes is selected for Startup Wizard (recommended), you will be prompted for the following values: