Operating Instructions

Chapter 4 - Parameters and Menu Structure
Wizards
29 | 187
Siemens Industry, Inc.
Siemens BT300 HVAC Drive
DPD01809
Smart Infrastructure
2019-05-29
Chapter 4 - Parameters and Menu Structure
All information and parameters are organized in a menu structure:
Quick Setup (M1)
All basic parameters
required to quickly setup
the BT300 VFD for
operation and all
available wizards.
P1.17 PID Mini-Wizard
Diagnostics (M4)
Diagnostics information such
as active faults, fault history
and counters.
M4.1 Active Faults
P1.18 Multi-Pump Wizard
M4.2 Reset Faults
P1.19 Startup Wizard
M4.3 Fault History
P1.20 Fire Mode Wizard
M4.4 Total Counters
P1.21 Bypass Wizard
M4.5 Trip Counters
Monitor (M2)
Access to the Multi-
monitor display and
parameters used for
monitoring.
M2.1 Multimonitor
M4.6 Software Info
M2.2 Basic
I/O and Hardware (M5)
Parameters for status of I/O,
real time clock, keypad, and
fieldbus configuration.
M5.1 Basic IO
M2.3 Timer Functions
M5.2 Slot C
M2.4 PID Controller 1
M5.3 Slot D
M2.5 PID Controller 2
M5.4 Slot E
M2.6 Multi-Pump
M5.5 Real Time Clock
M2.8 Fieldbus Data
M5.6 Power Unit Settings
M2.9 Temp. Inputs
M5.7 Keypad
Parameters (M3)
Parameters used for
basic and advanced
configuration
requirements.
M3.1 Motor Settings
M5.8 RS-485
M3.2 Start/Stop Setup
M5.8.1 Common Settings
M3.3 References
M5.8.3 BACnet MSTP
1
M3.4 Ramps and Brakes
M5.8.3 Modbus RTU
1
M3.5 I/O Config
M5.8.3 N2
1
M3.5.1 Digital Inputs
M5.8.3 P1
1
M3.5.2 Analog Inputs
M5.9 Ethernet
M3.5.3 Digital Outputs
M5.9.1 Common Settings
M3.5.4 Analog Outputs
M5.9.2 Modbus TCP
M3.6 Fieldbus DataMap
M5.9.3 BACnet IP
M3.7 Prohibit Freq
User Settings (M6)
User information such as
keypad language selection,
parameter backup/restore,
and drive name.
M6.1 Language Selection
M3.8 Limit Superv
M6.5 Parameter Backup
M3.9 Protections
M6.6 Parameter Compare
M3.10 Automatic Reset
M6.7 Drive Name
M3.11 Timer Function
Favorites (M7)
List of user-defined
parameter list.
M3.12 PID Controller 1
M3.13 PID Controller 2
M3.14 Multi-Pump
User Levels (M8)
Restricts the visibility of
parameters
P8.1 User Level
M3.16 Fire Mode
P8.2 Access Code
M3.17 Appl. Settings
M3.18 Bypass
2
1
Displayed based on value of Protocol (P5.8.1.1)
2
Displayed based on value of Bypass (P3.17.4)