Data Sheet for Product

ManualsBrandsSiemens ManualsVariable Speed DriveSiemens BT300 HVAC Drive, Application Manual

Technical Specification Sheet

Document No. 149-711

May 29, 2019

Page 1 of 16

Siemens Industry, Inc.

BT300 HVAC Drives

Figure 1. BT300 HVAC Drive without and with Integral

Disconnect.

Description

Siemens Industry's BT300 is designed specifically for

the demands of today’s HVAC systems. Increased

focus on energy efficiency of variable flow systems has

increased the need for easy-to-use and highly reliable

variable frequency drives that reduce the cost of

installation and maintenance while maximizing energy

savings.

The BT300 comes standard with unique and industry-

leading features:

• Motor Switch Ride Through – during maintenance

the motor disconnect switch can be opened and

closed without stopping or tripping the drive.

• Thin Film Capacitors – eliminate the need to

condition or reform the capacitors before applying

power.

• View/Monitor nine parameters at one time – user

selectable, users determine the parameters for

their applications.

• Smallest Type 12 footprint on the market – lower

shipping cost and easy installation.

Designed for HVAC

HVAC demands are unique to other drive applications.

The BT300 is singularly focused on the needs of

HVAC variable flow systems:

• Built-in wizards for start-up and easy setup of

advanced functions

– PID Start-up Wizard

– Multi-pump Wizard

– Fire Mode Wizard

• EMI/RFI filters to meet EMC Immunity IEC 61800-

3 first and second environment.

• Integrated DC bus chokes equivalent to 5%

impedance.

• BT300 Thin Film Capacitors do not require

conditioning. Immediate drive replacement is

possible.

• Standard Integration Protocols (APOGEE

P1,

BACnet, Modbus, LON (optional), Metasys N2)

• Two built-in PID controllers for fast and accurate

process control

• Built-in fire mode controller

• Energy Savings with > 97.5% efficiency

• Optimized cooling fans

• UL Type 1 and Type 12 – Same Size

• 208 Vac to 240 Vac 1 hp to 125 hp

• 380 Vac to 500 Vac 1.5 hp to 250 hp

• 525 Vac to 600 Vac 3 hp to 200 hp

• Optional integrated drive disconnect

• Advanced I/O expansion capability built into the

drive

• One common interface throughout all power

ranges

• Intuitive graphical keypad with multilingual display.

Summary of content (16 pages)

PAGE 1
Technical Specification Sheet Document No. 149-711 May 29, 2019 BT300 HVAC Drives Designed for HVAC HVAC demands are unique to other drive applications. The BT300 is singularly focused on the needs of HVAC variable flow systems: • Figure 1. BT300 HVAC Drive without and with Integral Disconnect. Description Siemens Industry's BT300 is designed specifically for the demands of today’s HVAC systems.
PAGE 2
Ease of Use Investment Protection The BT300 drives are easy to use, easy to understand and easy to program. This means installed cost and maintenance savings. Information you want for your specific operation: The BT300 supports Siemens Industry's long-standing, industry-leading backward compatibility tradition. The BT300 HVAC Drive is backward compatible to SED2 installations.
PAGE 3
Product Numbers Example: Example: BT300 BT300 - 0 0 0 0 1 1 X 5 2 4 - 0 1 1 2 X D Model(s) BT300 Separator HP 11), 1.52), 22), 3, 5, 7.5, 10, 15, 20, 25, 30, 40, 50, 60, 753), 1003), 1253), 1504), 2004), 2505) X = no fraction, 5 = 1/2 hp Voltage 2 4 6 Separator NEMA 006) 01 12 Type VFD Only 208 Vac to 240 Vac 380 Vac to 500 Vac 525 Vac to 600 Vac Chassis Version (IP 00) NEMA Type 1 (IP 21) NEMA Type 12 (IP 54) Drive Only Disconnect7) X D 1) Available only with voltage code 2.
PAGE 4
Specifications Table 1. Drive Specifications. Specification Input Voltages and Power Ranges (3-phase) Input Frequency Output Voltage Output Frequency Output Frequency Resolution Efficiency Overload Capacity Description 208 to 240 Vac (-10% to +10%): 1 hp to 125 hp (0.75 kW to 90 kW) 380 to 500 Vac (-10% to +10%): 1.5 hp to 250 hp (1.1 kW to 160 kW) 525 to 600 Vac (-10% to+10%): 3 hp to 200 hp (2.2 kW to 132 kW) 45 to 66 Hz (50 to 60 Hz; -5% to +10%) 0 to Input voltage 0 to 320 Hz 0.01 Hz >97.5% 1.
PAGE 5
Specification Description EMC Immunity Fulfills IEC 61800-3 (2004), first and second environment EN61800-3 (2004) Category C2 Can be field modified for IT networks for C3 or C4 ratings. RS-485: APOGEE P1, BACnet MS/TP (BTL), Modbus RTU, Metasys N2 Ethernet: BACnet IP (BTL), Modbus TCP FS4: 45/56 FS5: 57/65 FS6: 63/72 FS7: 43/73 FS8: 58/73 FS9: 54/75 FS4: 49 CFM FS5: 88 CFM FS6: 219 CFM FS7: 159 CFM FS8: 426 CFM FS9: 560 CFM UL 508C; UL; cUL; CE; BTL,RoHS compliant; EN61800-5-1 (2007).
PAGE 6
Specifications, Continued Table 2. Control Board Technical Specifications.
PAGE 7
Specifications, Continued Table 3. Embedded Protocol Technical Data. Description APOGEE P1 Interface Data Transfer Method Transfer Cable BACnet MS/TP Modbus RTU Metasys N2 BACnet IP RS-485 RS-485, half-duplex STP (Shielded Twisted Pair), type Belden 9841 or similar Connector Baud Rate(s) 4800, 9600 Address 0 to 127 14 AWG (2.5 mm2) 300, 600, 1200, 2400, 4800, 9600, 19200, 9600, 19200, 38400, 76800 38400, 57600, 76800, 115200, 230400 0 to 127 1 to 247 Modbus TCP 100BaseT, 802.
PAGE 8
Table 4. Output Ratings, Continued. 525 Vac to 600 Vac (3-Phase) 380 Vac to 500 Vac (3-Phase) Voltage (±10%) Page 8 of 16 HP kW 1.5 2 1.1 1.5 3 2.2 5 7.5 10 15 20 25 30 40 50 60 75 100 125 150 200 250 3 5 7.5 10 15 20 25 30 40 50 60 75* 100* 125* 150 200 4 5.5 7.5 11 15 18.5 22 30 37 45 55 75 90 110 132 160 2.2 4 5.5 7.5 11 15 18.
PAGE 9
Accessories Table 5.
PAGE 10
Dimensions Table 7. Overall Dimensions for BT300 Type 1 and Type 12 in Inches (Millimeters). Page 10 of 16 Frame Size Height Width FS4 FS5 FS6 FS7 FS8 FS9 12.9 (328) 16.5 (419) 21.9 (557) 26.0 (660) 38.0 (966) 45.3 (1150) 5.0 (128) 5.7 (144) 7.7 (195) 9.3 (237) 11.4 (290) 18.9 (480) Depth (without Disconnect) 7.5 (190) 8.4 (214) 9.0 (229) 10.2 (259) 13.5 (343) 14.4 (365) Depth (with Disconnect) Weight lb (kg) 10.6 (270) 11.6 (294) 11.9 (302) 13.1 (332) N/A N/A 13.0 (6) 22.0 (10) 44.0 (20) 83.
PAGE 11
Dimensions, Continued Figure 2. Siemens Drive Dimensions, FS4, Wall-Mount. Figure 3. Siemens Drive Dimensions, FS5, Wall-Mount. Siemens Industry, Inc.
PAGE 12
Dimensions, Continued Figure 4. Siemens Drive Dimensions, FS6, Wall-Mount. Figure 5. Siemens Drive Dimensions, FS7, Wall-Mount. Page 12 of 16 Siemens Industry, Inc.
PAGE 13
Dimensions, Continued Figure 6. Siemens Drive Dimensions, FS8. Siemens Industry, Inc.
PAGE 14
Dimensions, Continued Figure 7. Siemens Drive Dimensions, FS9. Page 14 of 16 Siemens Industry, Inc.
PAGE 15
Wiring Diagrams Table 8. Control I/O Terminal Signals on Basic IO Board and Connection Example. * Digital inputs can be isolated from ground. Siemens Industry, Inc.
PAGE 16
Table 9. Order Worksheet. Description Item Quantity Designation Part Number Voltage HP Enclosure Frame Size Information in this document is based on specifications believed correct at the time of publication. The right is reserved to make changes as design improvements are introduced. APOGEE is a registered trademark of Siemens Industry, Inc. Product or company names mentioned herein may be the trademarks of their respective owners. © 2019 Siemens Industry, Inc. Siemens Industry, Inc.