User Manual

Building Operator User Guide
Operation and Monitoring
1
12 | 25
A6V11881696_en_j
1.4 Operation and Monitoring
1.4.1 Viewing sites and building data
1. Find and select the site you wish to view in the Site list view.
2. Select the equipment you want operate.
Building Operator uses Haystack tags, generated in Building Operator Discovery
to identify, organize and map specific data. For more information regarding
Haystack, please see: https://project-haystack.org/tag. For a list of whitelisted
tags in Building Operator, please see the Appendix in the Building Operator
Engineering Guide (A6V11881627).
3. Select the data point you want to view in the Equipment list results.
If there are no data points assigned to an equipment, you can delete the
equipment by using .
4. A new window will appear to the right of the list results. The default time period
is Day. You can select the other time-value buttons to manipulate the period
shown in the graph.
1.4.2 Remote web access
This Service allows you to remotely expose available web applications that reside
within the remote building automation control network at the connected site.