User Manual

Building Operator User Guide

Before you start

A6V11881696_en_j

7 | 25

1 Building Operator User Guide

1.1 Before you start

Overview

This Service allows you to remotely operate and monitor building equipment like

heating, ventilation and air conditioning as well as applications and meters for a

fleet of connected sites.

● Multi-site overview

● View live and historical values at data point level

● Command data points

● Remotely access available on-premise web applications within the connected

building automation controls

Connect device

This Service is currently only compatible with the models of Siemens gateways

made commercially available under the brand name Connect (the “Connect device

family"). A description of the Connect devices is set forth below. Accordingly, to

implement this Service, a Connect device must be purchased and installed on

premise at a site specified by you in accordance with a separate agreement

between your company and Siemens. You will be responsible for such installation

of the Connect device at the site and any associated costs to perform such service

in accordance with related documentation for the device.

After log-in you may be able to directly access and impact connected sites and

assets as specified in the related documentation. You and your company are

solely responsible for any impact on the connected sites and assets which result

from your use of this Service.

Contractual documents

To be eligible to use this Service, it is required that your company signs a Master

Order Form for usage of Digital Services with your local Siemens entity. This

Master Order Form is tied into the Digital Service Agreement (DSA) together with

this Product and Service Data Sheet (PSDS) which is the Specification Document

for this Service and any further Exhibits to the foregoing. All the above-mentioned

documents make up the contractual documents.

Prerequisites:

– Signed Master Order Form