User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
A6V11881627_en_k
11 | 69
➀
Protective earth
The protective earth connection must be connected on the installation side with the
building grounding system (PE).
Min. diameter: 2.5 mm
2
/ 14 AWG)
➁
Pluggable Terminal Block for operating voltage DC 24 V =
➂
ON/OFF Switch, OFF when pressing
➃
USB 2.0, 3.0 interfaces (unused)
➄
Serial interface, 9-pin for RS 232, EIA-422, EIA-485 (unused)
➅
Display Port Interface (unused)
➆
Serial interface, 9-pin for RS 232, EIA-422, EIA-485 (unused)
➇
X1P1 = LAN (customer network) Ethernet 10/100/1000 Mbps (with 2 LEDs per port for
indicators)
➈
X2P1 = LAN (internet access) Ethernet 10/100/1000 Mbps (with 2 LEDs per port for
indicators)
There are multiple LED lights on the Connect device. The table below outlines
each light’s function: