User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
12 | 69
A6V11881627_en_k
1. In the Connect device landing page, select Accept to verify you’ve
acknowledged the end user license agreement.
2. Next, enter the following credentials in the fields provided:
– Username: admin (case-sensitive)
– Password: admin (case-sensitive)
3. Next, complete the prompt to change the default password. This password is
specific to the Connect device you are logged in to. Select a password that
complies with the following guidelines:
– At least 8 characters
– Uppercase and lowercase letters
– Numbers
– Special characters
4. Select Change Password when finished.
5. Sign in again with the newly created password.
1.2.3 Choosing network and activating Connect Device
After you sign in to the Connect device, complete the following instructions:
◈
Select a network connection mode. The two options are as follows:
– Separate network mode: Select this option if your building automation
network and Internet use two different physical network connections. In this