User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
A6V11881627_en_k
15 | 69
4. Directly connect your PC to the LAN port via 169.254.169.254
5. Check with the IT administrator if there is a proxy in the network – enable the
proxy settings and set a fixed IP address on the WAN port.
1.2.4 Adding Connect devices
Before using Building Operator, you need to create a site, add and activate your
device, and update your device.
 In Building Operator
◈
Go to Switch Apps > Asset Manager.
Creating a site
 In Asset Manager:
1. Create a new site via one of the options below:
– Go to Dashboard > Sites.
– Go to Sites > Add.
2. Fill in the fields on the ensuing form appropriately.
3. Confirm with Add.