User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
18 | 69
A6V11881627_en_k
5. Confirm with Update.
6. Navigate to the Services tab and find the status of your application.
Update Operating System
To update the operating system of the Connect device, follow the steps below.
 In Asset Manager:
1. Go to Sites.
2. Select the site with the Connect X300 device.
3. Select the device > Updates.
4. Click Update
5. Confirm with Update.
The operating system update could take approximately 20 minutes depending on
your network bandwidth. Ensure that the download rate of your network
bandwidth is at least 8Mbit/second, or else the update will likely time out. Wait
before proceeding to the next step.
If you update the operating system, you’ll be logged out of the Connect Device
Interface.
 (Optional) In Connect device:
◈
Navigate to the Maintenance tab in Connect device to follow the software
update in real-time.