User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
22 | 69
A6V11881627_en_k
1.3.1 Logging in to Building Operator Discovery Remotely
You can log in to Building Operator Discovery remotely, or locally. The instructions
below outline how to log in remotely. To log in locally, use a local port or network
cable. The tunnel will close the session after one hour, even if you are actively
working.
Gateway software must be version 4.0.5 or higher to use the Remote Access
Web Feature for Building Operator Discovery.
 In Building Operator
1. Select the site you want to log in to.
2. Go to Remote Web Access.
3. Find Building Operator Discovery and click Open.
4. Wait for the connection to verify.
5. A new tab will open in the browser. Log in using the following credentials (case-
sensitive):
– Username: admin
– Password: admin