User Manual

Building Operator Engineering Guide

Adding Data Points Using Building Operator Discovery

A6V11881627_en_k

31 | 69

Uploading a .CSV File to Building Operator Discovery

Once you’ve configured the file, it’s time to upload it to Building Operator

Discovery.

1. Select and expand the Modbus drop-down in the Navigation tree.

2. Select Register Maps.

3. Select Upload, below the Modbus Register Maps list. You won’t see any

results if you haven’t uploaded a Modbus file yet.

4. Select Choose File. Select the appropriate file from your device.

5. Select Upload to proceed. Your file will now appear in the Modbus Register

Maps list results.

Adding a Modbus Connector

Once you’ve uploaded the file, you must then create a Modbus connector. This

connector will help you add points to your Modbus devices later.

Modbus Properties

● Dis: Name of connector

● ModbusSlave: The salve of the Modbus device being connected (default is 1).