User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_k
35 | 69
To test the connection of your device, type <niagaraStationIP>/haystack/about
into your browser.
Adding your Niagara device using a nHaystack connector
After installing the nHaystack modules, you can now add your device to Building
Operator Discovery. To add a Niagara Framework device via nHaystack connector,
follow the steps below.
 In Building Operator Discovery:
1. Expand Connectors and select Haystack.
2. Click Add.
3. Type in the appropriate information in the ensuing pop-up.
– URI: Enter the IP address that connects to the station. The URI scheme
must be in the following format: http://host/haystack/
– Display Name: Enter the desired name for the connector.