User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_k
37 | 69
1.3.6 Adding Equipment and Data Points
Once you’ve added a floor object, you can then add equipment objects to the
hierarchy. These objects are discoverable through object discovery in Building
Operator Discovery.
The Equipment hierarchy level, although optional, provides flexibility to structure
the device level in Building Operator. Typically, the equipment corresponds to a
BACnet device; however, two or more building equipment of a BACnet device can
be mapped to two or more equipment in Building Operator Discovery.
Adding Equipment
To add an equipment object to a floor object, complete the instructions below:
1. Expand the Equip Tree in the Navigation pane.
2. Expand the site object, then select the right floor object.
3. Select the plus icon (+) below the available objects pane, then select Add
Equip.