User Manual

Building Operator Engineering Guide

Adding Data Points Using Building Operator Discovery

A6V11881627_en_k

41 | 69

3. Select Delete [Point or Equipment Name].

4. Select Delete in the ensuing pop-up to confirm.

5. Go to Building Operator and see that the point was successfully deleted from

that device.

1.3.8 Adding Tags to Data Points

Now that you have added points to the device, you can configure and tag these

points to meet specific criteria. There are two types of tags in Building Operator

Discovery, both of which we’ll detail below.

Building Operator Discovery will automatically apply some tags for you based on

the point data type.

Marker Tags

Marker tags are used to indicate a type. They are a one-word string value that

describes the point. To add marker tags: