User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_k
43 | 69
4. Once you’ve selected the right property tag type, type to enter the tag-name or
manually select the tag-name field to find the right tag name.
5. Then, set the appropriate value for the tag using the field provided.
6. Select the check mark to confirm the change, then select Save to save the
changes.
Adding Marker Tags in Bulk
In Building Operator Discovery, you also have the ability to batch edit tags
assigned to points. This saves you from having to manually update point tags one-
by-one. To batch edit tags, complete the following instructions:
1. In the Available Equip Tree, navigate to the appropriate device and set it as the
current context.
2. Navigate to a specific point and change the value of a specific tag to the
appropriate value. In the workflow below, we’ll outline how to batch change the
property tag bacnetWriteLevel to 9.
3. To clone this value across all points in a device, select the settings icon,
below the Available Equip Tree.
4. Select Batch Edit and Clone, then Clone Tags in the ensuing pop-up.