User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
A6V11881627_en_k
49 | 69
6. Select Restart in the confirmation pop-up.
NOTE: You will likely lose and re-gain cloud connectivity during this process.
7. Log back into Building Operator Discovery to confirm the changes reflected
after the Connect device restart.
8. Refresh the Site page in Building Operator if the revisions don’t automatically
populate.
1.3.11 Creating and Restoring a Record Library
This section will cover the process for creating and restoring custom point and
equipment templates to reduce the configuration time of standardized building
applications.
1. Commission one device with the points named/tagged as desired.
2. Select the device in the equip tree and select the device tab on the main
window.
3. Select the points you would like to add to your record library and click Save to
Record Library.