User Manual

Building Operator Engineering Guide
Adding Data Points Using Building Operator Discovery
1
52 | 69
A6V11881627_en_k
12. When the Batch Record Editor window pops up, select your record library from
the dropdown box in upper left corner.
13. The points have been matched against your record library. Leave the three
toggle switches to Replace Existing Names, Marker Tags, His Tags, and click
Apply.
14. The points will be brought it with the correct name and tags. You can now clone
your equip to other devices of the same type. Before cloning, the equip with the
points you had setup should be the current context. Select BACnet under
Connectors in the Equip Tree.
15. Select the connectors you want to clone the equip to and click Clone.
16. If the equip was set to the current context, the Clone Options will be
prepopulated with the correct settings. Click Create.