User Manual

Building Operator Engineering Guide
Configuring Alarms in Building Operator Discovery
1
A6V11881627_en_k
53 | 69
17. To see the new equip refresh the Floor View.
1.4 Configuring Alarms in Building Operator
Discovery
CAUTION
Only use Alarm Config to add, modify or remove alarms. COVs may be needed to
ensure alarms are operating.
To configure alarms in Building Operator Discovery, please complete the following
instructions:
1. Log in to Building Operator Discovery.
2. Select the menu icon in the top-left corner.
3. Find and select Alarm Config.