User Manual

Building Operator Engineering Guide
Configuring Alarms in Building Operator Discovery
1
54 | 69
A6V11881627_en_k
4. In Alarm Config, you can set alarm configurations for the points on your device.
To do so, first select the appropriate Point Filter above the list results. Choose
from Number, Boolean, Enum or String value.
5. Then, select the box next to the appropriate point name(s). A blue check mark
will appear to the left of the point name. You can multi-select points and write
different values to them at once. Furthermore, the Select All box only selects
all the fields on the current list results page. If you have more than one page of
list results, you must manually scroll and Select All for each page.
6. Next, find and select the appropriate configuration type from the Alarm
Configuration drop-down menu.
7. Select Add / Edit to edit the point alarm values.
8. In the pop-up, change the value(s) in the fields provided to meet the
parameters for your point alarm. Select OK when finished.