User Manual

Building Operator Engineering Guide
Backing Up and Restoring a Building Operator Discovery Database
1
60 | 69
A6V11881627_en_k
3. To view the point alarm details, select the (i) information icon directly above
the point name.
4. Here you’ll find the point alarm details and associated tags. For example, you
can see the timestamp of when that specific point went into alarm (as outlined
below).
5. Select Close.
1.4.6 Viewing Alarms in Building Operator
Once a point goes into alarm in Building Operator Discovery, that state will also
reflect in Building Operator. For the time being, Building Operator only shows when
a point is in and out of an alarm state.
To view whether a point is in an alarm state, complete the following instructions:
 In Building Operator:
1. Select the site with the Alarm .
2. Go to Equipment.
3. Select the device with the alarm.
4. Select the point name that has the Alarm .
1.5 Backing Up and Restoring a Building Operator
Discovery Database
In Building Operator Discovery, you can back up or restore a database that you
have already created. This is particularly useful if you want to save engineering