User Manual

Building Operator Engineering Guide
Resetting Connect X300
1
66 | 69
A6V11881627_en_k
nHaystack
Building Operator Discovery supports Haystack REST API services to discover,
read, and write Niagara framework based control point objects.
● nHaystack Boolean Point
● nHaystack Boolean Writeable
● nHaystack Numeric Point
● nHaystack Numeric Writeable
● nHaystack Enum Point
● nHaystack Enum Writeable
1.7 Resetting Connect X300
1.8 Troubleshooting
1.8.1 Connect X300
The Maintenance mode on the Connect X300 device offers multiple device
operations that are required in the following cases:
● Moving a device from one site to another
● Change of network mode
● Registration of the device is not possible
● Update process or device activation is failing
 You have obtained suitable engineering specialist training.
 You are logged into a Connect X300 device via web interface.
1. Go to Maintenance tab > Device operation section.
2. Choose an operation and click the respective button: