User Manual

Working with Connect X300 devices
Viewing remote web access
6
A6V12060067_en_e
17 | 27
6.2 Viewing remote web access
Remote web access does not support web interfaces that use Adobe Flash or
Microsoft Silverlight. These web interfaces perform certain insecure operations
such as sending unencrypted data over the internet.
Remote web access can be configured, and other endpoints can be specified on
the device user interface. Tunneling for devices in and behind the gateway is
supported and must be engineered in the commissioning UI.
A user with the appropriate authorization can:
● configure and open a tunnel to a web server in the gateway (e.g. FIN or MSIB);
● configure and open a tunnel to a web server behind the gateway (e.g. Desigo
Control Point).
1. Go to Sites.
2. Select the Connect X300 device.
3. Select the device.
 The screenshot below displays the X300 Commissioning User Interface
in the first row, the web server of the app installed on X300 (e.g. FIN) in the
second row and below are listed the devices behind the gateway (X300).
4. Go to Remote access > click Open.
 A new tab opens and you are directed to the device's web interface.
5. Enter your login information > Log in.