User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
A6V11881627_en_i
11 | 66
5. Sign in again with the newly created password.
1.2.3 Choosing network and activating Connect Device
After you sign in to the Connect device, complete the following instructions:
◈
Select a network connection mode. The two options are as follows:
– Separate network mode: Select this option if your building automation
network and Internet use two different physical network connections. In this
case, connect the LAN cable to your building automation network, and your
WAN to the Internet.
– Single network mode: Select this option if your building automation
network, and the Internet, use the same physical network connection. In
this case, the use the WAN for both the Internet and building automation.