User Manual

Building Operator Engineering Guide
Setting Up Connect Device and Building Operator
1
12 | 66
A6V11881627_en_i
CAUTION
This selection is not reversible. A factory reset is required to change this
selection, which will result in loss of existing network configuration and project
data.
1. The following warning message will display if you select Single network mode.
See the Cybersecurity Guidelines (A6V11852371) document for further details.
2. To configure alternative IP and proxy settings, click the IP settings tab under
the Network tab.
3. (Optional) If you need to configure a proxy setting for an alternative WAN IP
address, do so by clicking the Network tab, then Proxy.
4. (Optional) Toggle on the proxy server button. Then type to enter the
appropriate values in the spaces provided.
5. In the Operation tab, copy the activation key. Proceed to Asset Manager to
complete activating your gateway.